Annealed Steel
Our high quality C67S annealed steel coils are manufactured using state-of-the-art technology and strict quality control measures. These coils offer consistent mechanical properties and excellent dimensional accuracy, making them the first choice for precision engineering and manufacturing projects.
Full hydrogen annealing：
using full hydrogen as the protective gas during annealing，not only significantly improves the heat transfer efficiency and the annealing capacity of the bell furnace, but also improves the uniformity of the furnace temperature, ensure the mechanical properties of the steel strip, and improve the intrinsic quality and surface quality of cold rolled plates.
Spheroidizing annealing：
Spheroidizing annealing is an annealing process to spheroidize carbides in steel. Our factory can achieve the spheroidization rate Min 95%.
Heat the steel to 20～30℃ above Ac1, keep it for a period of time, then slowly cool to a temperature slightly lower than Ac1, and stay for a period of time to complete the transformation of the structure, and obtain spherical or granular carbide structure uniformly distributed on the ferrite matrix .
Spheroidizing annealing is mainly used for hypereutectoid carbon steels and alloy tool steels (such as steels used in manufacturing cutting tools, измерительные инструменты, and molds). Its main purpose is to reduce hardness, improve machinability, and prepare for subsequent quenching. This process is conducive to plastic processing and cutting, and also improve mechanical toughness.
General annealing：
Steel strip is heated to a certain temperature and cooled slowly after sufficient heat preservation to obtain an independent operation process of balanced structure. The purpose is to improve the plasticity of the steel, facilitate the forming process, reduce the hardness of the steel, facilitate the cutting process, refine the grain, and uniform the structure to improve the toughness of steel
Annealed Steel Strip Major application:
1）Car Manufacturing: car clutch diaphragm spring, фрикционная пластина, пряжка ремня безопасности автомобиля, сиденье слайд, кольцо подшипника,Коромысло клапана двигателя автомобиля, и т. д..
2）Various door locks
3）Shock-absorbing disc spring washer
4）Shoe accessories, и т. д..
5）Hairpin, pin etc.
Main steel grade：CK45/CK50/CK55/CK60/CK67/CK75/SK5/SK85/51CrV4/50CrV4/60Si2MnA/T8A/T10Aetc.
Толщина | 0.2-6.0мм |
Ширина | 8-600мм |
Annealed strength | 140-200HV |
Monthly average capacity | 1500 ton*12 |
Coil weight | According to customer’s requirement |
Внутренний диаметр | 300-500мм |
Delivery time | 15-20 дни |
